Electric Scooter Cleaning Guide: Revitalize Your Ride

Guide to clean your electric scooter

Electric scooters are rising exponentially in demand, and their constant use makes them pretty normal to get dusty and dirty.

Whether you ride your scooter for an hour or take it out on long rides, they are bound to get dirty. The dirt may accumulate in the form of grime, grease, dust particles, etc. But if you decide to be lazy in cleaning off the dust and dirt, it can cost your electric scooter heavily in the future and impact its smooth performance. 

So anyway, you must focus on the importance of cleaning your electric scooter regularly for enhanced performance, durability, and functionality. Also, friction makes a dirty scooter susceptible to wear and tear. 

This post discusses the thorough ways of cleaning your electric scooter whenever required for a sparkling and optimal performance. Let’s get into the details. 

Table of Content [hide]

What Are the Benefits of Cleaning Your Electric Scooter?

Undoubtedly, electric scooters are eco-friendly, handy, and convenient means of transportation. But it would help if you emphasized the importance of regular cleaning as it packs endless benefits for maintaining the appearance and performance of electric scooters.


Cleaning your electric scooter helps you focus on individual parts and components to know which features are functioning optimally and which ones require attention, reducing the cost of future repairs. 


Some of the benefits of cleaning electric scooters include;

  • Improved performance
  • Improved durability 
  • Increased maximum lifespan
  • Safer rides
  • Enhanced value 
  • Better overall efficiency 
  • Aesthetically pleasing exterior 

How do you Clean your Electric Scooter Step by Step?

Cleaning an electric scooter requires cleaning each part of your scooter thoroughly. We have broken down the process to help you understand each part systematically. Let’s check.

  1. Prepare Cleaning Tools and Materials
  2. Clean the Exterior and Frame
  3. Clean the Seat and Handlebars
  4. Clean the Battery and Wires

Part 1: Prepare Cleaning Tools and Materials

Before getting into the details of cleaning the electric scooter, let us examine the comprehensive list of the tools and materials you’ll need to clean up one. The cleaning supplies include the following;

  • A clean microfiber cloth or two
  • Cleaning solutions (car wash solution, etc.)
  • Automotive cleaners 
  • Blow dryers and snow foam (both optional)
  • A dry or damp cloth 
  • A soft-bristle toothbrush or a small cleaning brush 
  • A soft sponge, biodegradable soap, towels, and toothbrush
  • A bucket of water
  • Mild detergent
  • A lubricant like WD40, vaseline spray, or oil
  • Maintenance spray 
  • Brake cleaner

Ensure using appropriate cleaning products for electric scooters to avoid any damage, as washing an e-scooter is an intricate process, and a lot can go wrong if not used wisely. 


Part 2: Clean the Exterior and Frame

Cleaning the exterior of an electric scooter, like washing the body, brakes, and wheels, is crucial. So first, you must understand what materials make up your electric scooter. Then, follow the princess for hassle-free cleaning.


Step 1: Examine your scooter for scratches and remove dust particles using a dusting rag or cloth. 

Step 2: Protect the electronic components like the battery and motor of your scooter from water, as they can malfunction them.

Step 3: Take lukewarm water and mild soapy water to clean the exterior of your electric scooter without damaging the paint. Start from handlebars, lights, fork, and deck. 

Step 4: Use a soft brush to scrub out the stains and stubborn dust particles. 

Step 5: With a soft sponge/brush and soapy water, clean your electric scooter’s other components, like wheels. Scrub the tires with a large, rough cloth and spin them by keeping your e-scooter on an elevated surface to clean them thoroughly. 

Step 6: Rinse the scooter with clean water quickly before it leaves marks to stain the appearance of your scooter, and dry it thoroughly with a moisture-absorbing dry cloth. Be careful when drying the brakes, as wet brakes equal longer braking distances. 

Step 7: Apply an optimal amount of grease/lubricant after washing your scooter’s suspensions, braking pads, and mobile parts to reduce friction between the joints’ moving parts and optional functioning. 

Reminder: We advise you to avoid direct water contact with electrical components and instead use a damp cloth to wipe them. Go minimal with water or any liquids.


Part 3: Clean the Seat and Handlebars

Cleaning the seat and handlebars requires using a sponge and a mild cleaning agent.

You can clean the small parts of your electric scooter, like buttons, levers, handlebars, cables, cavaliers, screws, holes, springs and lights, reflectors, stickers, and LED strips, by brushing them with an old toothbrush, soap, and toothpaste to remove any stains or dirt that is hard to remove. 


Clean your seat with a damp microfiber cloth or water and cleaning solution, and rinse it off immediately to avoid any chemical stains. 


Caution: Avoid using aggressive cleaning methods that may damage the materials.


Part 4: Clean the Battery and Wires

Most electric scooters have a li-ion battery and have a certain amount of acid in them. So do not overfill over the capacity and maintain the fluid levels to avoid damaging the cells.  

Ensure to disconnect the battery before gearing up to clean the electric scooter and avoid water contact with the battery and wires. Also, you must always turn your scooter off and ensure there are no live wires when working with water to avoid damage.

You can clean the small wires using an old toothbrush to remove any hard stains, dirt, or debris. 

Detach the battery and wipe it down with a clean, dry cloth, rag, or paper towel to remove any dirt or debris. But before putting it back, ensure it is completely dry. You can also leave it for about 15 minutes, as moisture can lead to problems in the future and hamper the lifespan. 

 

5 Important Tips for Cleaning Your Electric Scooter

1) Use a Clean Sponge

When cleaning your scooter, be sure to use a clean sponge. This will help ensure you don't spread any dirt or grime around. Use a sponge that is specifically designed for cleaning electric scooters. These sponges are made of a softer material, which is less likely to scratch the surface of your scooter. A regular kitchen sponge will work just fine. Give it a good rinse before using it on your scooter.

2) Avoid Harsh Chemicals

Harsh chemicals can damage the finish on your electric scooter. If you must use a cleaning agent, choose a mild one. You can try using white vinegar or lemon juice as a natural alternative. Dilute these liquids with water before applying them to your scooter.

Electric scooter for adults are durable materials that can withstand wear and tear; however, it's important to be careful of the products used to clean them. Harsh chemicals can damage the finish and make it more susceptible to scratches.

3) Be Careful of the Water Temperature and Pressure

Lukewarm water is usually the best temperature to use when cleaning scooter. When the water is too hot, it could damage the battery, and when the water is too cold, it won't be as effective at removing dirt and grime. To maintain E-scooter is important to make it work for a longer time. Lukewarm is good for avoiding any damage that hot or cold water might do.

Cold water can harm your battery, so try to avoid using it. The pressure from a garden hose can damage the delicate parts of your scooter. A gentle stream from a hose attachment will suffice. Avoid water from the jet washes and use a bucket or bowl instead. High-pressure water can damage your electric scooter.

4) Dry Thoroughly

Once you've finished cleaning your electric scooter, dry it thoroughly. Water can damage the electrical components of your scooter if it's not dried properly. Use a clean, dry cloth to wipe down the entire scooter. If you live in a humid climate, consider using a hair dryer on the low setting to help speed up the drying process. For scooter maintenance, cleaning it is important, but so is drying it thoroughly afterward.

For best results, vacuum the entire scooter, including any nooks and crannies where water could accumulate. Allow the scooter to air dry completely before using it again, which helps maintain an electric scooter.

5) Don't Forget to Clean the Tires

It's important to clean the tires of your electric scooter regularly. This will help ensure that they maintain good contact with the ground, which is necessary for proper braking and acceleration. Use a brush or cloth to wipe down the tires after each ride.

You may need to clean the tires more frequently when you live in a muddy or sandy area. Cleaning your scooter's tires is important to maintain good contact with the ground and proper braking and acceleration.

 

Electric Scooter Maintenance and Storage Tips

While cleaning an electric scooter can be time-taking due to multiple components, it requires regular maintenance to prevent any mechanical problems and, in turn, boost the vehicle’s efficiency. 

Follow these maintenance tips to keep your ride running reliably whenever you take it out for a joyous spin. 

Cleaning the electric scooter

Always use a damp rag and water to wipe the dust and dirt. Alternatively, an all-purpose cleaner can wipe the stubborn dirt and grime.

Lubricate moving parts 

Use a good lubricator with PTFE to lubricate the scooter’s wheel and headset bearings, folding mechanism, and shock absorber to prevent friction from damaging essential components of your electric scooter. 

Maintaining tires

Check the air pressure regularly, especially if your electric scooter has pneumatic air tires, and keep them at the recommended air pressure. Also, look for wear and tear and replace the tires when treads get too low.

Check brakes 

If your electric scooter has disc brakes, check the pads for wear, ensuring the friction material is in place to stop quickly as you drive. 

Battery care 

Refer to the owner’s manual to prevent overcharging or overheating. For example, if your electric scooter has a lithium battery, maintain some charge as they become irreparably damaged if they lose charge completely. 

Check cable and fasteners 

Ensure your electric scooter is in stable condition and nothing comes loose. Check screws and fasteners and use a wrench to keep everything tight. Check cable housing and fittings for wear and tightness. 

Friendly Reminder: We advise you to thoroughly clean before storing your electric scooter for an extended period to prevent damage.


The Bottom Line

Owning an electric scooter is easy, but maintaining an optimum performance requires regular and thorough cleaning. So you must recognize the importance of regular electric scooter cleaning. Furthermore, you must develop good cleaning habits for your electric soccer’s improved durability and longevity. 

Try the cleaning methods mentioned in the article today, and enjoy the pleasure of riding a revitalized electric scooter.

If you encounter any issues during the cleaning process, you can seek assistance on Hiboy’s official page and contact the Hiboy support team at https://www.hiboy.com/pages/contact-us and get troubleshooting information at https://hiboy.com/pages/faq.


Frequently Asked Questions

How often should I clean my electric scooter?

The washing frequency of your electric scooter depends on the amount of dirt and debris it has stored and, of course, the current season. For example, the dusty and rainy season calls for more frequent cleaning than other seasons that require cleaning once every two weeks.

Can I use water to clean my electric scooter?

Yes. You can use lukewarm water with mild soap to avoid damaging the paint of your electric scooter. But ensure to use minimal water as excessive moisture can combine with dirt and oil on your electric scooter to form a hard paste and cause possible damage to the body and components.

What precautions should I take when cleaning the battery of my electric scooter?

The battery is an integral part of your electric scooter. Therefore, you must prepare the charging port before cleaning your scooter by covering it so that the cleaning products do not get inside the system. Also, ensure you have unplugged the charging before cleaning the battery. Instead, it would help if you charged it only before or after the cleaning process is complete.

Is there a specific way to clean the brake system of my electric scooter?

The electric scooter brakes take a lot more pressure than the brakes of a regular scooter due to the high-powered motor. So you must be extra cautious while cleaning and maintaining to preserve the brakes.For a quick way, use a good quality brake spray in a well-ventilated area. Spray the cleaner on the brake components, wipe the dirt away with a clean cloth, or leave the product to evaporate.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

  • HIBOY: Safety First, Your Trusted Partner for Joyful Rides

    HIBOY: Safety First, Your Trusted Partner for Joyful Rides

    At HIBOY, safety isn't just a slogan, it's a core value that drives everything we do. We believe that...

    Hiboy Official

  • How to Avoid E-Bike Accidents?

    How to Avoid E-Bike Accidents?

    Introduction In recent times, with electric bikes providing more advantages, including enhancing your health and becoming more popular throughout...

    Leon Wang

  • Six Impressive Valentine's Day Date Ideas 2024

    Six Impressive Valentine's Day Date Ideas 2024

    February 14 is synonymous with Valentine's Day globally. It is one of the most lover-centric holidays that excites everyone...

    Leon Wang

1 of 3