Hiboy S2 / S2 Pro Rear Fender with Bracket

As advertised, perfect replacement if you also broke off the original. Replacing this requires removal of bottom cover guard and slight removal of silicone holding wire the lower part of scooter. Replacing takes about 20 min with a Phillips screwdriver. I would recommend getting shrink wrap over the replacement connection. Use the original screws.

It fits perfectly!

Item came as ordered, well packaged and on time. However, the tail light plug did not fit my older (2 yr) S2 Pro and had to splice the older plug to get the brake light/light function. Also, the bracket set screws did not go all of the way and needed washers. These fell off the old fender causing it to crack when lifted. I used a slightly smaller screw from the broken fender with locktite. Also needed a new (3) set of platform screws as my old ones were getting rounded and difficult to tighten down.
Once installed the fender is solid and does not rattle and looks like new.