Say Goodbye to E-Bike Brake Noise (Guide 2024)

Leon Wang:08 May, 2024

Table of content

Introduction

Electric bikes are becoming more popular nowadays because they are tranquil, pollution-free, cool, and more economical in use than conventional vehicles. However, one of the most embarrassing sounds in the world is when your serene e-bike ride is coarsely interrupted by the harsh screech of brake squeal! If you're a passionate e-bike rider, this common and unexciting familiar irritation has probably left you inquisitive about the explanations behind it, and more importantly, you intensely crave to know how to put a muzzle on it.

In this blog post, we're profoundly diving into the e-bike brake squeal issues. We'll explore its basic reasons, disclose some successful preventive measures, and provide the best solutions to end those nerve-racking squeals that badly upset your riding meditation.


What Causes E-bike Brake Noise?

One of the most common noises that you'll hear on your e-bike's disc brakes is they may be screeching. Here, we will find the most common reasons why this happens. 

  • Screeching brakes could be due to recent snow or rain. 
  • Surface rust is forming on your brake rotors. 
  • Dirt particles caught in your e-bike's brake system. 
  • The brake pads of your e-bike are worn down.
  • Brand new and fresh brake pads come with a factory coating on their sides. As you ride a brand-new e-bike, the factory coating will start to burn off. Then, you'll notice the brakes are making squeaky noises.
  • A bent rotor can lead to clinking noises as the e-bike's wheel rotates. 
  • Sticky brake caliper piston seals can generate noise. 
  • Loose parts in your e-bike, like brake calipers and rotor-mounting bolts or incorrectly tightened wheel spokes, can create vibrations that are apparent as brake noise.
  • Improperly aligned disc brake mounts can generate a noise. 

Analysis of Potential Culprits Causing Brake Noise 

  1. Brand New Brake Pads

Brand-new brake pads come with a factory coating on their sides. The brakes make squeaky noises when the factory coating starts to burn off. 

  1. Worn-out Brake Pads

When you press worn-out brake pads, they can start squealing right away. 

  1. Brake Contamination

When oil, dust, and grease, etc., build up on the brake pads and rotor, it will cause squealing on engaging brakes.

  1. Brake Caliper Misalignment

A misalignment in the brake caliper can lead to irregular brake pad wear and irritating noises. 

  1. Rotor Alignment

Misaligned and deformed rotors prompt sounds and vibrations. 


Noisy E-Bike Brake Solutions (2024)

When you hear a squeaking noise coming from your e-bike's brakes, usually worn-out brake pads are generally the prime suspects that come to mind. However, when you find your brake pads are not worn, you should focus on fixing squeaky brakes with these reliable methods:

Here’s a detailed guide on steps to reduce or eliminate brake noise.

  1. Put Some Lubricant or Grease on the Brake Pads

If your e-bike's brakes are new and still making noise, spread the brake lubricant to the back of the brake pad and ensure that the brake pad friction exterior and rotor are not covered with any greases or lubricant. Otherwise, braking performance will decrease significantly. 

  1. Replace the Rotors and Pads

When the e-bike's brake pad friction cover wears out, the brake caliper and rotor start touching, and as a result, you'll hear a squealing sound. However, bent rotors indicate the brake pads cannot touch the rotors evenly during braking.

You can check if your brake pad carries less than 3/8 inches of friction component and the rotor cover contains prominent grooves, or if the rotor has an exterior eruption, you should replace your brake pads to ensure stop noises and safety on the road.

  1. Fix The Brake Calliper Misalignment

Loosen the two bolts as required and move the caliper until there is a clear space on both sides of the brake disc. Make sure to adjust the top and bottom ends of the caliper as well. After the brake disc is correctly centered between the brake pads, with sufficient space on both sides, you must tighten the two bolts to secure the caliper back in place.

  1. Fix The Contaminated Brake Pads and Rotor

These straightforward steps below will help you fix squealing in your bike brake issues due to the contaminated brake pads and rotor.

Front and Rear Brake Fixes

  • Unscrew both bolts and carefully remove the front caliper.
  • Remove the brake pads without touching their surfaces with your fingers.
  • Clean the brake pads with fine-grade sandpaper until their surfaces are glossy and free of any apparent contaminants.
  • Use some amount of rubbing alcohol and a piece of clean cloth to wipe the brake pads and let them dry completely.
  • Reinstall the brake parts without touching their surfaces, as the oil from your fingers can easily contaminate the brake pads and rotor again.

Proper Maintenance Techniques For Brake Pads And Rotors

Now that we've analyzed the leading causes of brake squeal, let's reorganize and explore how to prevent it using proper maintenance techniques for brake pads and rotors with these effortless methods.

  1. Practice Regular Maintenance

Check your brakes monthly, and pay close attention to pad wear, rotor condition, and bolt torque.

  1. Make a Maintenance Schedule

Establish a maintenance schedule for routine brake checkups depending on your e-bike riding frequency and conditions. However, you can inspect them with more extensive checks every three to six months.

  1. Ensure Proper Installation

Make sure that your brakes are installed correctly. Otherwise, it can lead to noise issues. 

  1. Selection of Correct Brake Pads

Select the suitable brake pads that align with your riding style, your e-bike's overall weight, and the terrain and environment you usually ride in.


Recommendations for Brake Cleaning, Alignment, and Lubrication

Make a habit of regular inspections for timely brake pad replacements, rotor maintenance, brake fluid flushes, and the brake caliper alignment to ensure your e-bike brakes perform optimally and provide you with peace.


The Bottom Line

Brake squeal might be the most common irritant for e-bike riders. However, it does not have to be a permanent component of your rides. By analyzing its causes and executing preventive measures and solutions, you can get rid of those harsh screeches.

Don't forget that regular maintenance of the brake system and selecting the suitable brake pads can make all the difference. So, enjoy your next e-bike riding adventure without the annoying brake squeal!

FAQs

  1. Can I fix a noisy e-bike brake myself?

Yes. You can install a set of shims to reduce vibrations, which will eliminate the squealing noise. Shims often retain a layer of rubber to lessen vibrations and ensure that brake pads are tightly connected to the brake calipers.

  1. Will changing my brake pads eliminate the noise?

Worn-out e-bike brake pads can decrease your braking performance, cause screeches and vibration, and result in a faster wear-out of your rotors. So, it is essential to replace the brake pads as soon as you notice any apparent signs of wear, such as squealing, grinding, vibrating, or warning lights, to eliminate the brake noise. 

  1. How often should I service my e-bike braking system to avoid noise?

If you notice the brake bite is stronger when it makes a sound, you need to go to the mechanic and wash it well, as dirt is there, making rough edges inside that make noises and create sudden strong bites. However, you should service your e-bike braking system every three months to avoid brake noise.